VEEDER-ROOT INTEGRATION
Veeder-Root Remote Monitoring, Run From Head Office
A Veeder-Root probe can read a tank on its own. But a reading stuck on-site isn't much use, so Head Office puts it in front of you, wherever you are.
Keep your Veeder-Root tank gauges exactly where they are, and see every reading, delivery and reconciliation line in one dashboard alongside the rest of your site.
WHERE IT SITS ON THE FORECOURT
The gauge doing the quiet, critical job
Veeder-Root probes are among the most widely fitted tank gauges on forecourts across New Zealand and Australia, sitting inside each tank reading fuel level, temperature and water on an ongoing basis. On plenty of sites they've been doing that job for years, quietly, with the office none the wiser unless someone walks over and checks the local display. The gauge itself isn't the problem. What's usually missing is a way to see that data from anywhere else.
PLUG IN, NOT RIP OUT
Connected in days, not weeks
Nothing about your Veeder-Root hardware needs to change. Glassbox ships a small pre-configured box that connects into the site network - plug it in and the forecourt appears on the dashboard within minutes, tank readings included. There's no VPN to configure and no network re-engineering, just secure HTTPS out of the box, with the whole thing set up remotely in a matter of days.
WHAT YOU GET
Live tank data, without the site visit
-
See it live
Watch fuel levels, temperature and water readings from every Veeder-Root probe on the network, updated continuously instead of on a walk-past.
-
Catch deliveries as they land
Match each delivery against the tank's rise the moment it happens, rather than waiting for a paper docket to be entered later.
-
Reconcile automatically
Tank readings, sales and deliveries reconcile inside Head Office as one process, so a discrepancy is a same-day alert, not a month-end discovery.
ONE PLATFORM, EVERY BRAND
Built to work alongside what's already there
Working with Gilbarco Veeder-Root Australia │ NZ, Glassbox delivered a DOMS forecourt controller integration for two Sydney forecourts, Bonnyrigg and Canley Heights, under demanding pre-Christmas timeframes - Veeder-Root tank data running through Head Office right alongside the payment side of the business. That's the pattern network-wide: Glassbox integrates directly with the pump controllers, tank gauges, payment terminals and price boards already on site, including Gilbarco, Invenco, Veeder-Root, Franklin Fueling, PAX, POSTEC and more, and keeps running if any of that hardware changes down the line.
FAQs
Can I see my Veeder-Root tank gauges remotely?
Yes. Once your Veeder-Root probes are connected through Glassbox, tank level, temperature and water readings show up in Head Office alongside every other piece of equipment on site, viewable from any device rather than only on the local display in the office. That remote view updates continuously, so an operations manager can check tank status across a whole network without visiting a single site. It's the same dashboard used for pumps, payment terminals and price boards, so tank data isn't sitting in a separate system that needs its own login.
Do I need to replace my Veeder-Root equipment to use Glassbox?
No. Glassbox works with the Veeder-Root hardware already fitted on your forecourts rather than requiring a swap. This is the same approach used across every hardware category Glassbox connects to: will it work with the pumps, gauges and terminals already on site is the most common question buyers ask, and the answer is yes across brands including Gilbarco, Invenco, Veeder-Root, Franklin Fueling, PAX and POSTEC. If a site later changes gauge brand, monitoring carries on without a rebuild.
How fast can Veeder-Root remote monitoring go live?
Setup is measured in days, not weeks. The pre-configured Glassbox box connects over secure HTTPS as soon as it's plugged in, with no VPN and no network re-engineering required, and remote setup for a full rollout typically completes within days. Many networks start with the free 30-day trial to see live Veeder-Root data on the dashboard before committing to a wider rollout.
Does Glassbox replace my Veeder-Root console, or work alongside it?
Alongside it. The local console keeps doing its job on-site; Glassbox pulls the same tank data into Head Office so it's visible remotely and connected to reconciliation, delivery matching and site alerts. Nothing about the physical Veeder-Root installation changes.
What else does Glassbox connect to besides Veeder-Root tank gauges?
Pump controllers, payment terminals and price boards, across brands including Gilbarco, Invenco, Franklin Fueling, PAX and POSTEC. The point of Glassbox is running a mixed-hardware network from one screen rather than one system per equipment type, so a Veeder-Root tank gauge and a different brand's pump controller can sit in the same dashboard.
Veeder-Root is a trademark of its respective owner. Glassbox is an independent software platform.
Get Live Visibility of Your Veeder-Root Tanks
Book a demo and we'll show your Veeder-Root data running inside Head Office, alongside the rest of your network.
CONTACT US
